Tag Archives: bang and olufsen

audio, hardware, hifi

Just one snag with Bang & Olufsen’s beautiful new Edge speaker system: it is mono

1 Comment

Bang & Olufsen (B&O) has a long history of innovative design; it has always been the brand to look for if you want an audio system that looks beautiful as well as delivering decent sound quality.

When I arrived at the B&O booth here at IFA in berlin the unusual Shape wall speakers caught my eye. This is as much art as audio and would be a talking point in any living room.

image

Shape is not new though. The press briefing began with a cloth draped over something in the middle of the floor.

The something turned out to be the Beosound Edge, a new design inspired, apparently, by the UK £1.00 coin. The presenter helpfully placed one of these alongside the speaker system. Of course we have now changed the design of our coin so it is no longer round, but never mind!

image

The Edge is intended to be placed on the floor in the middle of a room, or it can be wall mounted.

image

Inside the aluminium circle are 5 drivers: a 10" dual-coil woofer, two 4" midrange drivers, and two tweeters. These are driven by an active system, with an internal power amplifier providing 2 X 200w for the woofer and 4 x 100w for the midrange and tweeters.

image

The midrange and tweeters are mounted back to back, so that sound emerges from both sides.

image

It is an intriguing design, thanks to what B&O calls an Active Bass Port. The idea is that at low volumes the speaker behaves like a sealed box unit, which B&O says gives a more precise sound. At higher volumes, a motorised flap in the port gradually opens, so it becomes a ported system. The image below catches the Active Bass Port in action.

image

There are a few other smarts in the system. B&O has integrated the speaker with Google Assistant and Amazon Echo so you can do voice control if you feel so inclined. It also supports Google Chromecast, Bluetooth streaming, and DLNA DMR  (Digital Media Player).

You can also control the volume by rocking the speaker, one way to increase, the other to decrease.

A Directional Sound Control allows you to tailor the sound coming out of each side. I am not 100% clear how this works, but you can for example designate one side for active listening, and the other for background listening.

As you can imagine, a busy show floor is no place to evaluate hi-fi. However it still sounded great. When I first saw the Edge I imagined it would be bass-shy because of the relatively small dimensions of the cabinet, but this proved not to be the case.

There is one thing that surprised me though. You cannot buy two of these and have stereo. Only a single speaker is supported, though B&O talks about “360 degree room filling sound”.

The reason, I was told, is that all the electronic processing and feedback makes it difficult to synchronize the timing of two systems to obtain an accurate stereo image. This is being worked on though, and an automatic firmware update is planned which will enable stereo at some future date.

You will be able to buy an Edge from mid-November this year.

I am not sure that this is the best sound you can get for $3,500 but what I love about it is the combination of good sound, good looks, and innovation. Value cannot be judged on sound quality alone.

More info here.

Specifications

The speaker measures 50.2cm diameter and 13cm width.

Ethernet port

Analogue line-in

Digital input

Wi-fi
Chromecast
Bluetooth 4.2 and audio streaming
DLNA – DMR

€3,250 or $3,500. Available mid-November 2018.

audio

AVI ADM 9.1 loudspeaker review – should we all go active?

I have reviewed the AVI ADM 9.1 active speaker system. This is a distinctive system, in that it builds amplification – both pre- and power amps – and a DAC into the loudspeaker cabinets. There is a remote to control volume and to select between two digital inputs or an analog input.

Why distinctive? Well, most consumer hi-fi is based on passive speakers with an external amplifier. There are lots of active monitors on the market aimed at the professional audio engineer, but most of these lack the pre-amp, DAC and remote.

What is an active speaker? Read the review; but in a nutshell it is one where each speaker driver has a dedicated amplifier, so that the crossover, which divides the audio signal into frequencies suitable for each driver, works on a low-level signal rather than one that is already amplified. This is well-known to reduce distortion. It also means that the amplifiers can be tailored exactly to the characteristics of the speaker drivers, since they are the only ones they ever have to drive.

The ADM 9.1 is expensive, but less so than the very high-end active systems on the market from the likes of Naim and Bang and Olufsen.

It raises the question: why are there not more active systems in consumer hi-fi? The short answer is that they do not sell that well, because they are inherently more expensive – you need at least double the number of amplifiers, presuming a two-way loudspeaker.

The long answer, claimed by AVI, is that the hi-fi industry is wedded to the idea of an upgrade cycle that keeps customers buying more. Passive systems, with several separate boxes, are more amenable to that process.